Macchi M.12 The Macchi M.12 was a flying boat bomber produced in small numbers in Italy in 1918. It had a conventional design generally similar to an enlarged version of other Macchi designs of the period and featured the Warren truss-style interplane struts that had been introduced on the Macchi M.9. A major difference however, was its twin-boom fuselage, each with a separate tailfin. The manufacturer Nieuport-Macchi, having acquired experience in seaplanes, began to study a new aircraft which he then offered to the Regia Marina under the designation of…
Tag: Italian
POMILIO GAMMA & GAMMA 1F
POMILIO GAMMA & GAMMA 1F The Pomilio Gamma was an Italian fighter prototype of 1918. The Pomilio company of Turin designed and manufactured the Gamma, a wooden, single-seat, single-bay biplane with wings of unequal span, the upper wing being of greater span than the lower. It was powered by a 149-kilowatt (200-horsepower) SPA 6A water-cooled engine driving a two-bladed tractor propeller. It had fixed, tailskid landing gear. The Gamma prototype first flew early in 1918. An Italian official commission observed a demonstration of it, and concluded that although it was…
Caproni Ca.3
Caproni Ca.3 The Caproni Ca.3 was an Italian heavy bomber of World War I and the postwar era. It was the definitive version of the series of aircraft that began with the Caproni Ca.1 in 1914. The Ca.3 was a three-engined biplane of wooden construction, with a fabric-covered frame. The crew of four were placed in an open central nacelle (front gunner, two pilots and rear gunner-mechanic). The rear gunner manned upper machine guns, standing upon the central engine in a protective “cage” in front of a propeller. The fixed…
Macchi M.7
Macchi M.7 The Macchi M.7 was an Italian single-seat fighter flying boat designed by Alesandro Tonini and built by Macchi. A modified version of the M.7, the M.7bis won the Schneider Trophy in 1921. The M.7 was similar to the earlier M.5 but had a modified hull and was powered by an Isotta Fraschini V.6 engine. Due to the end of World War I, only 17 aircraft were delivered to the Italian Navy. In 1919, two were sold to Argentina and four to Sweden, and in 1921, Brazil bought three.…
SAVOIA-POMILIO SP.2
Savoia-Pomilio SP.2 The Savoia-Pomilio SP.2 was a reconnaissance and bomber aircraft built in Italy during the First World War. It was a refined version of the SP.1, and like it, took its basic configuration from the Farman MF.11: a biplane with twin tails and a fuselage nacelle that accommodated the crew and a pusher-mounted engine.The SP.2 entered mass production with SIA, and with co-designer Ottorino Pomilio’s own firm that he had recently established. Around 300 examples were produced, and by spring 1917, these equipped twelve front-line squadrons of the Aeronautica…
Società Aeronautica Meccanica Lombarda (S.A.M.L.) S.2
Società Aeronautica Meccanica Lombarda (S.A.M.L.) S.2 The S.A.M.L. (Società Aeronautica Meccanica Lombarda) was the main Italian constructor of the German Aviatik B.1 and B.2 designs up to 1916. In 1916-1917 the company developed this model into a native design called the S.1, which was powered by a 260 hp Fiat A-12 engine and equipped with a rotatable 6.5mm Revelli machine-gun on a tripod mounting in the rear cockpit. A further development of the S.1 including a modified and enlarged rudder, a second machine-gun and a more powerful engine resulted in…
Società Italiana Aviazione 7B
Società Italiana Aviazione (SIA) 7B The SIA 7B was a biplane reconnaissance-bomber built by the Società Italiana Aviazione and served with the Italian Corpo Aeronautico Militare and American Expeditionary Force in 1917. It used the standard Italian structural feature of a plywood-covered fuselage. The SIA.7B was accepted for the Italian Air Force in November 1917 and entered mass production. There were however revealed its shortcomings, like low wing structure durability and poor view. Next variant SIA.7B2, developed in December 1917, had strengthened wings, slightly raised cockpits and stronger engine. Another…
Ansaldo S.V.A.5
Ansaldo S.V.A.5 An exceptional aircraft for its time, the Ansaldo S.V.A.5 was preceded by the S.V.A.4 which was designed in 1917 by Umberto Savoia and Rodolfo Verduzio with Celestino Rosatelli. The principal difference between the S.V.A.4 and the S.V.A.5 was fuel capacity. With a larger fuel tank, the S.V.A.5 could remain in the air two hours longer than the S.V.A.4. In air trials these aircraft were fast and sturdy but lacked the manoeuvrability necessary in a good fighter plane. As a result, the S.V.A.5 entered service as a long range…
CAPRONI Ca.5
CAPRONI Ca.5 The Caproni Ca.5 was an Italian heavy bomber of the World War I and the postwar era. It was the final version of the series of aircraft that began with the Caproni Ca.1 in 1914. By late World War I, developments in aircraft technology made older bomber designs unable to penetrate targets defended by modern fighters. Caproni’s response to this problem was to significantly uprate the power on the existing Ca.3 design, with some versions of the Ca.5 eventually carrying engines with nearly five times the total power…
Caproni Ca.4
Caproni Ca.4 The Caproni Aircraft Company made a series of heavy Bomber aircraft in WW1 (Ca.1 to Ca. 5). The Caproni Ca.4 was one of these. Its main features was a triplane (3 wing) arrangement, and 3 engines. The Ca.4 was a twin-fuselage triplane of wooden construction with a fabric-covered frame. It had an open central body, that was attached to the under-surface of the centre wing. This central body contained a single pusher engine, pilot, and forward gunner. The other two engines were tractor mounted at the front of…