Sikorsky S-16

Sikorsky S-16 The Sikorsky S-16, or RBVZ S-XVI (named after its manufacturer), was a Russian equi-span single-bay two-seat biplane designed by Igor Sikorsky in 1914-15. Conceived in response to demand for an escort fighter for the Ilya Muromets bombers, it was noteworthy in that it was one of the first aircraft to possess synchronisation gear for its 7.7 mm machine gun. The first S-XVI was completed on 6 February 1915 with an 80 hp engine instead of the intended 100 hp because of supply problems. On 17 December 1915, the…

Standard J.1

STANDARD J. 1 – Trainer – US Based This two-seat basic trainer built as a sturdy two-bay biplane was produced from 1916 to 1918. It was powered by a four-cylinder inline Hall-Scott A-7a engine. Made of wood with wire bracing, and fabric. It was seen as a stopgap waiting for the Curtiss JN-4. Made by Ealy Day as a derivative of the Sloan H series under Standard Aero Corporation. Standard, Dayton-Wright, Fisher Body and Wright-Martin, delivered 1,601 of them in one year, between June 1917 and June 1918. The Standard…

Felixstowe F.2

Felixstowe F.2 The Felixstowe F.2 was a 1917 British flying boat class designed and developed by Lieutenant Commander John Cyril Porte RN at the naval air station, Felixstowe during the First World War adapting a larger version of his superior Felixstowe F.1 hull design married with the larger Curtiss H-12 flying boat. The Felixstowe hull had superior water contacting attributes and became a key base technology in most seaplane designs thereafter. The Felixstowe F.2A was used as a patrol aircraft over the North Sea until the end of the war.…

Grigorovich M-16

Grigorovich M-16 Grigorovich M-16 was a successful Russian World War I-era biplane flying boat of the Farman type, developed from the M-9 by Grigorovich. Somewhat larger than the M-9, the M-16 was a version especially intended for winter operations, with better aerodynamic qualities. The double-float seaplane was designed by DP Grigorovich in 1916 with the aim of being used in winter conditions with the ability to land on water, ice and snow. Between 36 and 40 copies were built and used with some success by the Baltic Sea Fleet .…

SPAD S.4.A

SPAD S.4.A The SPAD S.A (also called S.A.L.) was a French two-seat tractor biplane first flown in 1915. It was used by France and Russia in the early stages of the First World War in the fighter and reconnaissance roles. It was a somewhat unusual aircraft that carried its observer in a nacelle ahead of both wing and engine. The SPAD A.1 prototype was the first aircraft produced by SPAD following its reorganization from the pre-war Deperdussin company. The chief designer, Louis Béchereau, had been involved in designing that firm’s…

Flyingboats – WW1

Flyingboats Significant progress was made in naval flying in World War I. Three distinct categories of combat aircraft emerged: long-range overwater reconnaissance and antisubmarine aircraft operating from shore bases, shorter-range floatplane (so called because instead of wheeled undercarriages they floats to allow water landings) reconnaissance and fighter aircraft, and ship-borne aircraft. Long-range flying boats (so called because their fuselages were shaped like the hull of a boat) were used extensively by the British. These pioneered the technique of searching for submarines with methodical, mathematically developed search patterns. The French utilised…

GEORGES LEVY 40 HB2

Georges Levy 40 HB2 Avation Maritime’s distrust of triplane flying boats such as the Levy-Besson “Alerte” led the firm to design a version with the more traditional biplane wings, the Georges Levy 40 HB2. (“HB2” probably stood for Hydravion Bombardement with a crew of two.). With a 280hp Renault engine, the plane had good performance and it could carry larger bombs than other French flying boats. It entered service in November 1917. One hundred were ordered in France, and twelve were used by the US Navy. Though it was originally…

Lohner E

Lohner E The Lohner E was a reconnaissance flying boat built in Austria-Hungary during World War I. The “E” stood for Igo Etrich, one of the Lohner engineers. It was a conventional design for its day with biplane wings that featured slight sweepback, and an engine mounted pusher-fashion in the interplane gap. Its crew of two was seated in an open cockpit. Around 40 examples were built before production shifted to the more powerful L Plastic Kit Build Lohner E First flight: 10 November 1913 Number built: approximately 40 Crew:…

Aeromarine 40F

Aeromarine 40F The Aeromarine 40F was an American two-seat flying-boat training aircraft produced for the US Navy and built by the Aeromarine Plane and Motor Company of Keyport, New Jersey. Fifty out of an original order for 200 were delivered before the end of World War I, with the remainder cancelled due to the armistice. The aircraft was a biplane with a pusher propeller. The pilot and instructor sat side by side. The Aeromarine 41 developed from the Aeromarine 40. At least some of the Model 40s were later converted…

Hansa-Brandenburg W.20

Hansa-Brandenburg W.20 The Hansa-Brandenburg W.20 was a German submarine-launched reconnaissance flying boat of the World War I era, designed and built by Hansa-Brandenburg. Due to the need to be stored and launched from a submarine aircraft carrier, the W.20 was a small single-seat biplane flying boat that was designed to be assembled and dismantled quickly. It had a slender hull on which was mounted a biplane wing and a conventional braced tailplane. It was powered by a seven-cylinder, 80 PS Oberursel U.0 rotary engine — basically a German-made near-clone of…